SII IP-6600-01 Manual de instrucciones Pagina 28
- Pagina / 32
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
28
7 DoorCom DCA 740-01 8 DoorCom IP
Factory setting
IPVS 600-...
The DoorCom Analog DCA 740-...
is used as an interface between
DoorCom IP and an analog tel-
ephone connection of a telecommu-
nication system.
It is possible to assign the maximum
number of possible users in a line to
the DCA 740-... . The functionality
depends in the main on the capa-
bility of the telephone system /on
the telephones connected to it.
Assignments and functionality
for calls via the DCA 740-... are
saved in the SII 650-... . This can
be programmed using BPS 650-...
if the connection via DCA 740-... is
selected.
The selection of users and control
and switching functions takes place
by means of DTMF dialling. The
telecommunications system and the
connected telephones must there-
fore possess DTMF dialling capability.
Power supply
The DCA 740-... is supplied directly
from the SIVS 610-... . A separate
supply is consequently not required.
The power to the a/b public net-
work interface is supplied from the
telecommunication system or the
a/b public network connection from
the exchange. It is not possible to
connect an individual public network
telephone directly to the a/b line of
the DCA 740.
With the reset button at the
IPVS600-..., it can be reset to the
as-delivered status. It is essential to
load the Siedle factory configuration
in the IPVS600-... after a reset.
Proceed as follows.
1 Start the Internet Explorer on the
PC and enter the following in the
address line:
http://192.168.0.1
The IP settings in the as-delivered
status of the IPVS610-...
User name: Service
Password: None issued on
delivery
The user interface is opened.
2 Select the Expert mode menu
item
3 Under Expert mode select the
menu point Maintenance.
4 Under Configuration select
"Search“ to find the configuration
file and select.
The file is on the supplied CD.
5 Select the file rtc_image.
6 Start the update with "Upload".
- DCIP 650-01 1
- DoorCom IP In-Home 1
- Contents 2
- System conditions: 3
- 3 Structure DCIP 650-01 4
- In-Home bus: Video 4
- Video communication via IP 5
- Bus camera module 8
- Input modules 9
- Interfaces, power supply 11
- 4 Software 12
- Terminals DCIP 650-01 13
- LED displays SIVS 610-0 14
- 5 Terminal assignment 16
- SIVS 610-0 16
- SII 650-0 17
- 5 Installation 18
- In-Home bus Video 19
- Single line system 19
- Multiple line system 23
- 6 Commissioning 24
- 7 Client-Software 26
- DCIP SC 600-0 26
- Factory setting 28
- IPVS 600 28
- 9 Measured values 29
- 10 Glossary Index 30
Relacionado con productos y manuales para Impresión y escaneo SII IP-6600-01
Impresión y escaneo SII MPU-L465 Manual de usuario
(32 paginas)
(32 paginas)
Impresión y escaneo SII DPU-S series Guía de usuario
(54 paginas)
(54 paginas)
Impresión y escaneo SII DPU-S series Guía de usuario
(48 paginas)
(48 paginas)
Conceptronic C30-013 manuels
Manuels d'utilisation et guides de l'utilisateur pour Câbles USB Conceptronic C30-013.
Nous fournissons des manuels en pdf 1 Conceptronic C30-013 à télécharger gratuitement par type de document : Fiche technique
Comentarios a estos manuales